| Washing - Hydrasander - Single Product |
| The 100E, 150E and 200E single product Hydrasanders are used for dewatering and removing the silt content from washed sand. The large diameter bucket wheel, long fines recovery spiral and low power requirements enables these units to be both efficient and cost-effective. Concrete, building, mason and plaster sands can be produced. Tailings can also be dewatered. |
| click
to enlarge |
|||
 |
 |
 |
|
| 150E
Discharging onto a 532 Stockpiler |
200E with Optional 1.5M Main Body Extension |
200E
Bucket Wheel in Operation |
| Washing - Hydrasander - Twin Product |
| The Finlay 150TP Hydrasander provides two sands from the one unit. The model requires two separate sand slurry flows into the Hydrasander and are dewatered as separate products, typically a concrete sand and a finer building grade sand. |
| click
to enlarge |
|||
 |
 |
 |
|
| 100YP
on Site |
150TP
Operating on Site |
150TP
Discharging onto 532 Stockpilers |
| Washing - Hydrasander - Sand Clasification |
| The Finlay 252E Hydrasander is a specialist in sand classification. Its unique dual flow recovery spirals enable the operator to seperate two products in the settling tank – typically a concrete specified sand and a secondary fine product. The system consists of three recovery spirals with variable speed and direction control. Water pressure jets which agitate the sand in selected areas also enables better classification. This flexibility allows the operator to meet various sand and market specifications. |
| click
to enlarge |
|||
 |
 |
||
| 252E
Positioned Over Bays with 390R |
252E
Discharging onto 532 Stockpilers |
